ROWE AMI WALL BOX WRD-200

Home › Forums › Wallbox2mp3 installation › ROWE AMI WALL BOX WRD-200

Tagged: 

Viewing 12 reply threads
  • Author
    Posts
    • 13 November 2020 at 8 h 41 min #47914
      chris65
      Participant

      Bonjour

      je viens de récupérer une ROWE AMI WALL BOX WRD-200.

      Je recherche la doc technique de cette wallbox.

      Une aide pour la connectique (0.. 24V, signal , etc..)

      merci

      christophe

    • 13 November 2020 at 21 h 15 min #47916
      Scudie
      Participant

      Hi Christophe

      If you are contemplating connecting a Rowe Ami WRD 200 to a wallbox2mp3 adapter it may be an idea to email Fabien or Gaëlle for advice on the compatibility of a Rowe Ami WRD 200 with a wallbox2mp3 unit, as far as I can see the WRD is not currently on the list of compatible wallbox’s although there is a photo of one adjacent to the list which is a little confusing.

      There is a manual for the WRA WRB & WRC in the Support section, I think the WRD was there first wallbox that was solid state so the manual for the others may be of no use to you with the WRD.

      Sorry I can’t be of any further help with the manual.

      Cheers Scudie

    • 13 November 2020 at 21 h 46 min #47917
      chris65
      Participant

      Hello Scudie

      thanks for these informations, The WRD is an solid state. I will ask Gaelle to know for interfacing with Wallbox2MP3.

      For know , I just need some schematic to understand how I can connect the power supply, to put power ON first.

      I was looking on internet , and I don’t find any manual to buy on WRD 200

      Regards

      Christophe.

    • 13 November 2020 at 21 h 57 min #47918
      Scudie
      Participant

      Hi Christophe

      Perhaps if you could post a photo of the inside of the WRD showing the connector strip someone may be able to identify them?

      Cheers Scudie

       

    • 13 November 2020 at 22 h 36 min #47919
      Randy
      Participant

      There is a WRD manual on the US Ebay site.  But like Scudie I don’t think there is a currently available adapter.  The CDadapter folks have an emulator for the E &F models but the solid state boxes can be expensive to emulate.  Powering it up should not be a problem though show us the pictures.

       

      Randy

    • 14 November 2020 at 15 h 57 min #47923
      chris65
      Participant

      connectorOk ,thank, I found the schematic on US Ebay.

      See the connector picture.

      Regards.

      Christophe.

    • 14 November 2020 at 15 h 57 min #47922
      chris65
      Participant

      Hi Randy

      thanks , I will look for on ebay site.

      See attached the picture of the connector for the wallbox.

      Regards.

      Christophe

    • 14 November 2020 at 15 h 57 min #47921
      Randy
      Participant

      Also, I have a solid state ROWE – the CD WB.  Perhaps the connector strip in that is similar to yours.  The top terminal is labeled AC Power and the second terminal is AC Common.  It is a 24v transformer.

      Randy

    • 14 November 2020 at 16 h 15 min #47928
      Randy
      Participant

      OK so yours is basically the same with power and ground/common on the top two terminals.  On your strip common is the top terminal and power is the second.  I bought a Ring Doorbell transformer from Amazon to power mine, I think the French Amazon site has them as well.  Really any 24v AC transformer will work.

       

      Randy

    • 14 November 2020 at 18 h 14 min #47929
      Scudie
      Participant

      Good Aternoon Guys

      From Memory that connector strip looks to be different to the WRA that I converted & have the manual for. Glad that Randy was able to help although the label should be fairly self explanatory.

      On the subject of transformers I use a 25Vac terroidal tranformer from RS electronics, they do appear to have a French website.

      https://fr.rs-online.com/web/

      The part number is 671-8956

      I Don’t  know how they compare in price to stuff for sale on Ebay  might be worth taking a look.

      Cheers Scudie

    • 14 November 2020 at 18 h 15 min #47930
      chris65
      Participant

      OK Randy, thanks, I connected an 24 AC power as your mentionned and the wallbox is running.

      Now I just have to analyse the signal on Data line and clock line to see when I do a disk selection ,Power on if it is compatible with wallbox2MP3, I will ask Gaelle.

    • 14 November 2020 at 20 h 33 min #47935
      Scudie
      Participant

      Good to see you have it powered up, will be interesting to see what you are able to do with it, keep us informed.

      Cheers Scudie

    • 14 November 2020 at 20 h 35 min #47936
      Randy
      Participant

      Good looking wallbox, I hope you get it working.  It does not appear to be much different than the Seeburg DEC, maybe Fabien can adapt that emulator for this box.

      Randy

       

  • Author
    Posts
Viewing 12 reply threads
  • You must be logged in to reply to this topic.