[chris65]

OK Randy, thanks, I connected an 24 AC power as your mentionned and the wallbox is running.

Now I just have to analyse the signal on Data line and clock line to see when I do a disk selection , if it is compatible with wallbox2MP3, I will ask Gaelle.

[chris65]

Hi Randy

thanks , I will look for on ebay site.

See attached the picture of the connector for the wallbox.

Regards.

Christophe

[chris65]

Ok ,thank, I found the schematic on US Ebay.

See the connector picture.

Regards.

Christophe.

[chris65]

Hello Scudie

thanks for these informations, The WRD is an solid state. I will ask Gaelle to know for interfacing with Wallbox2MP3.

For know , I just need some schematic to understand how I can connect the power supply, to put power ON first.

I was looking on internet , and I don’t find any manual to buy on WRD 200

Regards

Christophe.

[chris65]

Dear Scudie

I don’t have anythings plugged in the audio jack.

I tried every combination of dip switch and the result is the same with the both pots, the sound volume is the same.

 

Regards Christophe.

[Author]

Posts